Shenzhen Yuzhou Machinery Equipment Co., Ltd
Integrity management, Consideration service.
Add to Cart
110v/220v/380v LPG transfer pump liquid gas transfer pump for liquefied petroleum gas cylinder
Descreption:
YQB series Lpg transfer pumpYQB series of liquefied petroleum gas pumps, mainly used for liquefied petroleum gas, propane and butane, are also suitable for filling or transporting volatile liquids and petroleum products of similar properties.
Technical details:
| Model | Speed n | Flow Q | Pressure difference ΔP | Working pressure P | Power N | Inlet size | Outlet size | Temperature ℃ |
| YQB1-5 | 600r.P.m | 1 m3/h | 0.5MPa | 2.0MPa | 1.5KW | 1'' | 1'' | +40-40 |
| YQB2-5 | 600r.P.m | 2 m3/h | 0.5MPa | 2.0MPa | 1.5KW | 1'' | 1'' | +40-40 |
| YQB3-5 | 600r.P.m | 3 m3/h | 0.5MPa | 2.0MPa | 1.5KW | 1'' | 1'' | +40-40 |
| YQB5-5 | 780r.P.m | 5 m3/h | 0.5Mpa | 1.6Mpa | 2.2KW | 1'' | 1'' | +40-40 |
| YQB10-5 | 780r.P.m | 10m3/h | 0.5MPa | 1.6MPa | 5.5KW | 2'' | 2'' | +40-40 |
| YQB15-5 | 780r.P.m | 15m3/h | 0.5Mpa | 1.6Mpa | 5.5kw | 2'' | 2'' | +40-40 |
| YQB25-5 | 600r.P.m | 25m3/h | 0.5MPa | 1.6MPa | 11KW | 3'' | 3'' | +40-40 |
| YQB35-5 | 780r.P.m | 35m3/h | 0.5Mpa | 1.6Mpa | 11kw | 3'' | 3'' | +40-40 |
| YQB50-5 | 600r.P.m | 50 m3/h | 0.5MPa | 1.6MPa | 15KW | 4'' | 4'' | +40-40 |
| YQB60-5 | 780r.P.m | 60 m3/h | 0.5MPa | 1.6MPa | 15KW | 4'' | 4'' | +40-40 |
| YQB80-5 | 780r.P.m | 80 m3/h | 0.5MPa | 1.6MPa | 18.5KW | 4'' | 4'' | +40-40 |
Advantages:
1.Equipped with Anti-Explosion Motor to obtain high safety performance;
2.Belt type transmission is convenient for Maintenance and Repair;
3.Inner rotary movement parts use metal to match nonmetal to avoid generating static electricity;
4.The vane can be pushed out from the slot of rotatory.The adjustment is automatically and continuous according to the wear condition, so the efficiency and transmission capacity is closer to its initial state throughout the life span of vane;
5.Can make fine tuning of the motor to reduce vibration and stabilize running;
6.The pump with absorbed-tube for inlet and outlet;
7.Equipped with one set quick-wear parts for easy replacement;
8.Pedestal is fixed on bottom of wooden case during transportation to avoid abrasion and ensure safety delivery.
How to use:
1. Connect the gas cylinder with the pump at the pump inlet and open the cylinder angle valve.
Inverted cylinder, (preferably the cylinder outlet is higher than the inverted pump) see the pressure gauge
There is no pressure. The normal pressure is about 2 kg.
2. Open the gun switch at the pump outlet, and need to drain the pump when using for the first time.
Inside the air, then turn on the empty cylinder and turn on all switches.
3. Test the car, turn the wheel by hand, check if there is any debris in the pump, and jog the power switch to test the pump to reverse direction. (there is a steering indicator on the pump)
4. Stop, the empty cans cut off the power supply and stop running, close the valves.
